Why You Need Asbestos Testing Before You Remodel

Remodeling a house is exciting but it can also lead to health issues if the house contains asbestos. Many older homes have asbestos in them. Asbestos is safe if it isn’t disturbed, but once it becomes disturbed due to the remodel the fibers can escape into the air. You breathe them in and they get trapped in your lungs where they cause changes to cells that results in cancer. The cancer that you get from asbestos is usually deadly and it can take years to manifest.

It is required that you do asbestos testing on any remodel and you can get the best asbestos testing service from Total-Asbestos.com.au. They are going to do a fast and affordable job on your home so you can get on with your life and start your remodel. Asbestos is very dangerous and you can’t take any chances with it. If you own an older home you have to get it tested to ensure that there are not going to be any issues.

The service is going to do careful testing of your home to see if any asbestos is present. If they find any asbestos they will come up with a plan that is going to remove it safely and carefully so you can get rid of it before the remodel. There is going to be a safe plan for the asbestos and you will be able to quickly have it removed. Asbestos is very dangerous and if any of it gets out into the air you can end up with a serious health hazard on your hands.

Getting the asbestos removed quickly and safely is crucial and you need a service that has a lot of experience to help you. Getting that experienced service is going to be crucial and you have to make sure that the service is going to do a good job taking care of your asbestos issue. It can take a while to get rid of the asbestos so you need to be patient while you are going through the process.

Once the asbestos is identified it will need to be contained and this can take some time. The house is often tented and special fans and vacuums are used while the home is being treated. The asbestos is going to be safely contained and it will have to be carefully removed and disposed of before the work can begin on your home. It is crucial that none of the fibers escape because it is just too dangerous if this happens.

People can die if they come into contact with the asbestos so it is very important that you get it treated as soon as you can. The asbestos removal service will develop the right plan for your home that is going to ensure that no asbestos gets out. This plan is going to make it easy to get started on your home and the remodel can take place once all of the asbestos is removed from your home.

Making Painting Easier

Painting can be a daunting task. You have to move furniture or cover them. You have to fix walls if there are holes or imperfections. To ease the pain of labour, here are some tips to make life easier when painting.

Prep is important. The better the prep you do, the less running around you have to do when painting. Have all your materials available in the room or near you. You can just concentrate on painting and not worry about getting certain materials you need or getting other tasks done.

Clean the walls with a dry rag or with a good soft broom to get rid of dust or cobwebs that are hard to see and can stick to the paint and brushes.

Always keep a moist rag to wipe up any messes. There are sure going to be accidental drips or slips so having one or two wiping rags handy can clean up messes quick before things dry out and are harder to clean.

Be consistent with your pressure and don’t look back at the fresh coat you did until it’s dry because you are likely to second guess your work and sometimes overdo it by going back all the time and trying to “fix” a spot you think needs better coverage.

Don’t put the paint on the paintbrush or rollers too thick or else it drips on the walls and will splatter more.

Do the cutting in first. It’s a good idea to have a couple of people doing the painting as one can do the cutting in one area first and the other can roll on the paint on the bigger surface areas after.

Hire professionals. This is a great option if you don’t have the time or the skills you to do it. Professionals like GB Painters can do it quick and at convenient times. Even if you’re on a budget, you can negotiate and get a great price for painting services.

Work left to right or right to left whatever is easy for you to work from one end of a wall to the other end.

When you take a break, have some plastic bags handy into which you can store the rollers and brushes. This will slow down the drying of the paint. For longer breaks, you can put the wrapped brushes in the fridge or freezer.

Don’t skimp on the quality of paint brushes and rollers. The cheap brushes will come apart when cutting and leave pieces on the wall or area you’re painting which is annoying to have to take off. Good quality rollers also will absorb paint better and spread it evenly.

Get a drop sheet. Go to a fabric store and find cheap fabric to use as a drop sheet. It’s better than a plastic drop sheet as it’s not as slippery and it will absorb the paint splattered on it.

Have a large ladder or a step ladder handy to reach higher areas. You can also use a roller extension (it can be a broomstick attached to the roller) if you don’t have a ladder.

For quick drying time, have a fan handy to ventilate the room after you’re done painting. You could also open windows if there are any if it’s not raining or heavy with moisture outside.

The Interior Paint Job

The easiest way to change the look of a home drastically or to enhance its beauty is by giving it a paint job. It’s also very cost effective because paints don’t cost as much as a complete renovation or furniture replacement. Just about anyone can paint their own home. You don’t need to go to school or get specific training to be able to do it. It’s not hard to do. Just follow the steps below and you’ll be painting up a storm in no time.

Choose Your Paint Colours
It’s awesome that paint swatches are available which show the paint colours that it matches well with even though it might not be in the same colour group. This makes it easy to choose a wall colour and colours for décor pieces that will complement the wall colour.

Gather Paints and Materials
Buy your primers and paints. If the colour you choose comes in a paint tin that hasn’t been moved in a while, have them shake the paint in the tin with their machine to make the colour in the paint tin uniform. If you have a large surface area and need several cans of paint, it’s a good idea to empty all your cans of paint in one big sealable paint container to mix and make the colour uniform so you get an even shade on the walls. If you’re pressed for time, a paint that covers in one coat (though more expensive) is perfect for speedy painting. Get paint stir sticks, a crowbar for opening the cans, paint brushes for cutting (a slightly angled brush is good), paint rollers, paint roller trays, extension poles, plastic bags for storing the rollers and brushes when taking a break, step ladder, drop cloth, painter’s tape, wiping rags, gloves, and eye protection if you want. You’ll also need plaster or other fillers, scrapers, and fine-grit hand-held sponge sanders for the prep.

Ready the Surface Area to be Painted
Preparation is key to a successful paint job. If the surface area is uneven, you should sand the bumpy areas to make it flat and flush with the surrounding area. If there are holes or dents in the wall, they should be filled with plaster or other appropriate filler material, dried, and sanded and swept free of dust before painting. This is the most difficult part of the painting project process but is vital to be done. The drop cloth should be put in place to cover the floor under the ceilings or beside the walls being painted. Areas that border the surface area being painted should be taped with painter’s tape so that the new paint doesn’t overlap with messy lines over the areas not being painted.

First Coat
Start painting from top to bottom. It’s advisable to do the cutting in first in the corners and tight spaces before using the roller on the larger surface areas. The first coat should be a primer. Work from left to right and top to bottom making sure the rolling pressure is even so that the paint will spread evenly. The primer isn’t there just to provide a blank canvas for the top final coats, it is also there to prevent stains from showing up on the top coat. It’s a good foundation on which the top coats can really stick to the walls and not peel. Let the primer dry for the recommended amount of time required.

Second Coat
Follow the same painting procedures as you did with the primer for the final coats of paint. The second coat would be the actual paint with the colour of your choice. If you’ve chosen the paint that is a one-coat paint only, it might seem to need a second coat at first; however, when you let it dry, you’ll see that it doesn’t need another. For regular quality paints, you’ll probably need two or three coats of the finishing paint. Let it dry completely. Having windows open if it’s sunny outside without rain or moisture is a good idea. That will vent the area and make the paint dry quicker. Having a fan in there to help the drying process is a good idea too.

Once the paint is completely dry, you can gently peel off the painter’s tape that was protecting the borders of the paint job. Clean up any spills or drops of paint that have made their way onto the floor or to other areas that is not supposed to be painted. Decorate with your favourite pieces and enjoy the new look of your home.

Painting is an easy project for many; however, some are unable to do it due to lack of time or the ability. If that’s the case with you, you should hire professional painting services like BJC Painting Services. Contact them via their website at http://www.bjcpaintingservices.com.au/ and have a look at the painting services they offer.

© 2019 A MarketPress.com Theme